The F&P Dual is the wind turbine that OZ Winds roots are founded
on . Having built many differing versions and models from the
Quad Stator many years back up until now where I have done
the full circle to now offer this as the "Ultimate F&P Dual ".
 It is heavily constructed of all steel laser cut components,hand
built, with 6mm blade hub machined and blades balanced to give
what I have claimed to be the " Ultimate F&P Dual stator " available
in the world.Other inclusions are , heavy duty sliprings, cowlings and 1x100S stator while I still have them available.
It can also be fitted with the optional ( manual furl ) so the tail can be
manually pulled paralell with the blades to be in a parked position
for very high winds or for shutdown purposes.

Oz Wind are the Australian Distributorfor Huaya, who are a highly reputable manufacturer of wind turbines from 500W to 30kW. All OZ Wind Turbines under 2.5kw are built on the 2.5kW Nacell Assy ( longest tail and strongest Nacell Assy Possible ). From there the Oz Wind modifications and checks are done to make these the best perfotrming 2kw wind turbine in the market today . Our turbines are the only turbines POWERED BY AUS BUILT GOE 222 BLADES, and not the std fiberglass blades . This one single modification puts our turbines Kilowatts ahead in power production over the std turbine, and this is garanteed. We also back our products Australian warranty, on all manufacture defect problems. Warranty is delt with here and not with someone who all of a sudden can not speak english. OZ Wind is commited to provide honest info & advice that most other sellers do not can not supply. We strive to make systems as economical and efficient at the best possible price for quality that will last.The 2kW Turbine fitted with 3.2m GOE222 Airfoils and coupled with the Oz Wind Capacitor Power Maximizer allows these turbines to produce power in 2.5m/s 7~9klm winds, from there they track the wind better and do not suffer from the constant hunting wind direction followed 360deg turns for no reason the Std turbine sufferes from. The GOE222 power difference is easily 2~3 times more accumulated power for storage over the day.

The generator easily out-puts in excess of its rated 2kW with proven data logged at ozwind that can back
this up . At 10 m/s the Oz Wind gen is pushing in excess of 2kW turbine, where the standard is struggling to push through 1kW. The manufactures answer is to fit bigger blade sets @3.8m this greatly increases tower loading and can add to balance problem. For high wind zones we advise to make the blade dia Max 3m for 2kW due to overpowering the generator.
We can also retro fit these blades to existing wind generators to give the same results and fully guarantee if to a refund if better power outputs are not achieved ..
At Oz Wind years of testing and experminting are behind the wind turbines that we sell, to offer affordable quality wind turbines with out the cost usually assosiated with similar size turbines .

Oz Wind are the Australian Distributorfor Huaya, who are a highly reputable manufacturer of wind turbines from 500W to 30kW. All OZ Wind Turbines under 2.5kw are built on the 2.5kW Nacell Assy ( longest tail and strongest Nacell Assy Possible ). From there the Oz Wind modifications and checks are done to make these the best perfotrming wind turbines in the market today . All of the OZ Wind turbines are POWERED BY AUS BUILT GOE 222 BLADES, and not the std fiberglass blades . This one single modification puts our turbines kilowatts ahead in power production over the std turbine, and this is garanteed. We also back our products Australian warranty, on all manufacture defect problems. Warranty is delt with here and not with someone who all of a sudden can not speak english. OZ Wind is commited to provide honest info & advice that most other sellers do not can not supply. We strive to make systems as economical and efficient at the best possible price for quality that will last.The 1kW Turbine fitted with 2.8m GOE222 Airfoils and coupled with the Oz Wind Capacitor Power Maximizer allows these turbines to produce power in 2.5m/s 7~9klm winds, from there they track the wind better and do not suffer from the constant hunting wind direction followed 360deg turns for no reason the Std turbine sufferes from. The GOE222 power difference is easily 2~3 times more accumulated power for storage over the day.

The generator easily out-puts in excess of its rated 1.5kW with unbias data logged at oz wind that can back
this up . At 10 m/s the Oz Wind gen is pushing in excess of 1.4kW , where the standard tturbine is struggling to push through 750W. The manufactures answer is to fit bigger blade sets @3.2m this greatly increases tower loading and can add to balance problem. For high wind zones we advise to make the blade dia Max 2.6m for 1 ~ 1.5 kW turbines for a longer service life and less stress on tower structures.
We can also retro fit these blades to existing wind generators to give the same results and fully guarantee a refund if better power outputs are not achieved ..
At Oz Wind years of testing and experminting are behind the wind turbines that we sell, to offer affordable quality wind turbines with out the cost usually assosiated with similar size turbines .

The OZ Wind 500W / 750W turbine is good strong turbine to add extra power smaller off-grid 12 and 24 volt systems. The Turbine kit comes with the power ful GOE222 blades. Even though it is originally a OEM
Chinese turbine that was not set up and balanced correctly .
We completly strip them and then modify the furling, balance the blades
and set the correct blade angles . Then the wiring to and from the sliprings is beefed up to better handle the output amps. while the generatoris apart the bearings are replaced with better quality Japanese
or German parts.
OZ Wind has been associated with these turbines for many years and have tested many options. The blade Dia can be easily made bigger to increase the power , we then usually fit the manual furl with this modification. Please discuss the options for what is best for your needs.

Good heavy duty 9 mtr tower that takes all the hard work and caculations out of building and locating all the necessary fittings for a wtg tower . Building and installing tower can easily add up to as much if not more than the Wind Turbine , this kit comes with everything you need to install a tower and with 8mm Guy Ropes and 16mm turnbuckles it is a over engineered structure. For Individual design specifics for your location please consult with OZ Wind Engineering for modifications and advise.

Good heavy duty 6 mtr tower that takes all the hard work and caculations out of building and locating all the necessary fittings for a wtg tower . This tower was origionaly designed to be a free standing tower, we do not recomend it be used this way ,and guy wires must be fitted . This requires welding on guy attachment points . Building and installing tower can easily add up to as much if not more than the Wind Turbine , these are an ecnomical professionally built tower for anyone without very good welding skills. For Individual design specifics for your location please consult with OZ Wind Engineering for modifications and advise. We give all info and help to source manufacture or supply any additional items to make lifting and lowering your tower as easy and safely as possible.

-This slip ring assembly is perfect for higher out put 3 phase wind turbines.
- With 6 Brushes there is less possibilty of loosing an output phase and less power loss.
-The rotor is centered on 2 metal sealed
bearings for many years of smooth and
trouble free operation.
-Wiring is connected to the 3 (4 x 1.2mm)
with solder and come pre tinned.
-Good quality slip rings to and easily added to a DIY wind generator build .
-Can be used in many other applications

- Good Quality Rectifier suitable for Wind Turbines ,Mini Hydro , AC / DC Generators and other.

- Reliabality from encapulated in a fined aluminium case for cooling gives better duty cycle.

- 9.5 mm spade terminals or can use small
M4 or M5 bolts , also solder connections direct.

- Good Quality Rectifier suitable for Wind Turbines ,Mini Hydro , AC / DC Generators and other.

- Reliabality in a smaller package, these suit
most Chinese wind turbine voltage controllers .

- M5 terminals mounts.

* Must be mounted on aluminium or suitable
heat sink .

Good all purpose gauge that is perfect for wind and solar systems of all voltages.
- Gives milti readings of Volts / Watts / Amps and can be used as state of charge.
- Easy to set up . High sample rate 5 per second
- Minimal current draw.
- Comes in two versions being Bi- Directional
where you can see yor input and output .
- Version 2 is current is measured in one direction but the unit can control a relay settable on Volts / Amps / Time etc
- Comes with 100A / 75mV Shunt , inter connect
board, cable and meter .